Oct, 31, 2024

Vol.57 No.5

Editorial Office

Archive

  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • Vol. 12 No.1
  • Vol. 12 No.2
  • Vol. 12 No.3

Vol. 12 No.1

Influence of Ca-Si Addition on Anodic Polarization Chgaraqcteristics of Al-Zn-In Anodes

Seo, Chang-Je;

성균관대학 이공대 금속공학과 대학원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 3-10.

Abstract

Many excellent Al-Zn-In anode have been developed up to the present. But for the purpose of the better performance of Al-Zn-In anodes in sea water the effect of calcium silicon addition on anodic polarization and current capacity of Al-Zn-In anodes was me

Keywords

Recovery and Re-used Process for waste Sulfuric Acid of Ancdizing Aluminium by the Perfect-Closed-System

;;Baek, Yeong-Nam;

日本金屬表面技術協회 技術賞 受賞;日本횡業 (株) 技術開發部;慶熙大학敎 水原大학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 11-17.

Abstract

黃酸法으로 만든 뜨거운 飽和黃酸알루미늄 溶液으로부터 알루미늄을 두터운 六角板상結晶으로 結晶化하는 새로운 방법이 硏究되었다. 이 방법은 溫度만을 조절함으로써 結晶特性을 改良하거나 六角板상結晶을 純化하는 結晶化방법으로서 그 工程은 4단계 이다. 첫 단계에서는 飽和黃酸알루미늄溶液을 黃酸으로 냉각시켜 黃酸알루미늄으로 結晶化 시키고, 둘째 단계에서는 結晶化된 黃酸 알루미늄을 함유한 流動체를 가열하여 結晶의 일부만이 溶液속으로 溶解하는 溫度로 최소한 1시간 유지한

Keywords

金屬表面處理의 最近動向 (II)

Gang, Hui-Taek;

韓國産業機械硏究所長;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 18-26.

Abstract

Keywords

도금액의 여과기술

Park, Chun-Ung;

韓國鍍金材料工業株式회社 工場長;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 27-35.

Abstract

Keywords

서독 표면공학의 최근 연구동향과 우리

Byeon, Su-Il;

韓國科學院 材料工學科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 36-39.

Abstract

Keywords

鍍金管理 니켈鍍金 (VI)

Ha, Lee-Yeong;

本工學會副會長, 大原通商 (株) 代表理事;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 40-42.

Abstract

Keywords

-A. S. T. M. 前處理시리즈 1- 高炭素鋼의 電氣鍍金 前處理

Yeo, Un-Gwan;

弘益工大金屬科 敎授;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 42-47.

Abstract

Keywords

알기쉬운 電氣鍍金 理論 (II)

표면공학회편집부;

표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 48-54.

Abstract

전회에는 평형전위, 분극, 과전압 및 이들과 도금의 균일전착성과의 관계를 고찰하고 또한 금속의 석출과 수소발생의 관계에서 오는 전류효율의 문제와 전류효율을 높이기 위한 문제등을 다루었으나 이번회에는 EDTA의 성질, 기레이트 화합물등 착이온에 관계되는 문제와 어떠한 인자가 도금속도에 관계하고 있는지 도금할 때의 속도에 관해 알아보겠다.

Keywords

Vol. 12 No.2

A Study on the kinetics of Aluminizing of Cold rolled Steel Sheets

Yoon, Byung-Ha;Kim, Young-Ki;

Department of Metallurgical Engineering Kyung Poog National University;Department of Metallurgical Engineering Kyung Poog National University;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 75-83.

Abstract

The Rates of formation and heats of activation for the intermatallic Compound Layers between Cold rolled sheet and molten aluminium &ath (adding small amounts of silicon) has been determined by Continous aluminizing method in the temperature range of 680<

Keywords

도금세척액으로 부터의 금속회수

Yun, Jae-Han;

서울대학교 공과대학 금속공학과 대학원생;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 84-87.

Abstract

Keywords

시안廢液 電解處理

이주성;

漢陽大工大 工業化學科 敎授 (工博);

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 88-95.

Abstract

Keywords

도금액의 농축회수법에 의한 도금공정 Cosoed System화에 관한 연구

Park, Chun-Ung;

한국 도금재료공업주식회사 공장장;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 96-106.

Abstract

Keywords

자동 폐수처리 시설 관리 ${cdot}$ 운용

Jang, Dong-Uk;

춘천직업훈련원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 107-114.

Abstract

Keywords

Disposal of Metal-Finishing Sludges -The Segregated Landfill Concept-

Byeon, Su-Il;Lancy, L.E.;Steward, F.A.;

韓國科학院 材料工학科;Dart Environment and Services Co. Lancy 硏究室;Lancy 硏究室 技術部;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 115-122.

Abstract

금속이 함유된 폐기물의 처리는 점차 금속표면처리산업(Metal Finishing Industry)에서 큰 관심이 되어가고 있다. 위생침적지(Sanitary Landfills), 혹은 소각로에서 다른 도시 쓰레기들과 같이 처리되는 것은 환경상 불안전하며 이러한 행위는 중단되어야 한다. 다른 방법으로는 특수한 위생침적지의 운영, 안전한 침적지, 금속폐기물의 고정(Fixation), 혹은 포장(Capsule)에 넣어 버리는 방법등이 있으나 이러한 것들은 비실

Keywords

Recovery Pay !

Yeo, Un-Gwa;

弘益工大 金屬科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 123-128.

Abstract

本교는 原調査報文 Plating and Surface Finishing;Recovery Pay! Vol 66. No2. (1979) 45~48P을 번역한 것으로 도금폐수의 회수재생에 드는 비용과 장치비 그리고 미국에 있어서의 도금공장의 폐수 회수처리 현황을 알아보는데 참고가 되리라 믿는다.(역자주) Plating and Surface Finishing지의 조사결과는 폐액회수장치를 설치한 도금공장회사들이 화공약품을 절약할 수 있었고, 공장폐수 내에 중금속

Keywords

A. S. T. M 前處理 시리즈 2 鉛, 鉛合金의 電氣鍍金前處理

Kim, Wan-Cheol;

弘益工大 金屬科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 129-132.

Abstract

Keywords

알기쉬운電氣鍍金 理論 (III)

표면공학회편집부;

표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 134-144.

Abstract

금회에는 평활한 도금을 하기위한 요인과 평활제와 광태제의 작용기구, 그리고 전류분포 흡장수소, 내부응력, 밀착성, 경도, 도금욕 관리를 위한 관점에서의 양극의거동 및 배수처리에 관한 기초문제에 관해 알아보고 끝을 맺겠다. 본 강좌는 현장 실무자를 위해 日本실務表面技術誌 1974년 9~12월호 75년 1~3월호에 연재되었던 것을 계제할것임을 밝힙니다.

Keywords

Vol. 12 No.3

Theoretical and Practical Aspects of Pb-Sn Alloy Plating

Paik, Young-Nam;

경희대학교 수원대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 161-166.

Abstract

Theoretical and practical aspects are investigated for electrochemical behavious, plating processes and the structures of electrodeposit of Pb-Sn binary alloy plating through numerous literatures in this report. The anodic and cathodic electrode reaction

Keywords

The mechanism of the formation of an anodic oxide layer on the aluminium

Park, Soon;Kang, Tak;

서울대학교 대학원 금속공학과;서울대학교 공과대학 금속공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 167-173.

Abstract

The structure of anodic aluminium oxide films formed in 2% oxalic asid at constant temperature was studied by the oid of the transmission and replica electron microscopy. Far the initial stage of oxidations, it is observed that pores are initiated from la

Keywords

Effects of organic additives in cyanide zinc electroplating Bath(Part 2)

Lee, Ju-Seong;Park, Jung-Il;

한양대학교 공대 공업화학과;한양대학교 공대 대학원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 174-179.

Abstract

The effects of brightness, electrochemical behaviour on the organic additives, such as aldehydes, polymers, amines and condensed product obtained from epichlorohydrin and nicotinamide, in cyanide zinc electrolplating bath have been studied by controlled p

Keywords

Alumina 被膜의 構造와 發色에 關한 硏究(I)

日本 輕金屬工業 (株);

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 180-189.

Abstract

Keywords

表面處理기술의 發展추세

Lee, Jae-Seong;

漢陽大 材料工學科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 190-192.

Abstract

Keywords

Chromate 被膜의 乾燥方法과 耐蝕性에 대한 硏究

Byeon, Gap-Yeon;

株式會社 大洋金屬;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 193-198.

Abstract

Keywords

鍍金管理

Ha, Lee-Yeong;

大原通商 (株);

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 199-201.

Abstract

Keywords

A, S, T, M 前處理 시리즈 3 鑄鐵의 電機鍍金 前處理

Yeo, Un-Gwan;

弘益工大 今屬科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 202-206.

Abstract

Keywords

An Interdisciplinary Approach for the Solution of Enviromental polution

Sin, Hyeon-Deok;

Associateprofessor Dept of Environmental Science Kyung Hee University;

KISE Journal of Korean Institute of Surface Engineering, Vol. 12, No. , pp. 207-216.

Abstract

Environmental pollution or contaminations caused by various kinds of pollutants have become one of most serious problems of our time. Environ mental pollution is the unfavoralble alteration of our surroundings, through direct or indirect effects of change

Keywords

  • Vol. 11 No.1
  • Vol. 11 No.2
  • Vol. 11 No.3

Vol. 11 No.1

A Study of Zn-coating Weight in Hotdip Galvanizing Process

Kim, Wan-Chul;Kang, Sung-Kun;Nam, Seung-Eui;

홍익공업전문학과 금속과;홍익공업전문학과 금속과;홍익공업전문학과 금속과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 5-13.

Abstract

This experiment intends to study Zn-coating weight through galvanixing process. A through examination has been carried out on the change of steel-composition, galvanizing-temperature, dipping-rime, Fe-loss when other factors were regular. Activation energ

Keywords

無公害 電氣鍍金

Baek, Yeong-Nam;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 14-21.

Abstract

Keywords

化學的 酸化處理法에 의한 크로메이트液의 再生

표면공학회편집부;

한국표면처리공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 22-25.

Abstract

老化크로미이트液中의 3가크롬을 6가크롬으로 酸化處理하여 크롬의 完全한 有效活用을 도첩한 化학的 酸化處理方式에 의한 크로메이트의 再生시스템에 관하여 기술하고자 한다.

Keywords

鍍金液管理 2.닛켈鍍金(iii)

Ha, Lee-Yeong;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 26-30.

Abstract

Keywords

Vol. 11 No.2

니켈鍍金浴에 있어서의 有機化合物 添加劑의 影響

Lee, Ju-Seong;

漢陽大學校 工科大學 工業化學科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 3-15.

Abstract

Keywords

프라스틱도금

Park, Chun-Ung;

한국도금;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 16-31.

Abstract

Keywords

鍍金液管理 2.니켈鍍金(iv)

Ha, Lee-Yeong;

대원통상;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 32-33.

Abstract

Keywords

-亞銳鍍金의 Series 1- 高性能 Zincate浴의 現狀을 보다

Lee, Gyeong-Sik;

이화상사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 34-37.

Abstract

Keywords

Vol. 11 No.3

Effect of Organic Additives in Cyanide Zinc Electroplating Bath (I)

Lee, Ju-Seong;Park, Jung-Il;

漢陽大 工大 工業化學科;漢陽大 工大 工業化學科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 3-9.

Abstract

Organic compounds, such as aldehydes, amines, amides, sulfur compounds of polymers, have been added to cyanide Zinc electroplating bath to achieve in improvement of the brightness and of the current efficiency. It was found that the addition of only one c

Keywords

크롬의 전착반응

Lee, Ju-Seong;

漢陽大學校 工科大學 工業化學科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 10-16.

Abstract

Keywords

鍍金施設의 自動化

;Ha, Lee-Yeong;

Ebara Udylite;;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 17-27.

Abstract

Keywords

金屬表面處理의 最近動向(I)

Gang, Hui-Taek;

金屬表面處理硏究所;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 28-39.

Abstract

Keywords

鍍金管理 니켈鍍金(V)

Ha, Lee-Yeong;

大原通商(株);

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 40-42.

Abstract

Keywords

-亞鉛鍍金 씨리즈 2- 熱處理에 强한 高性能 Zincate浴

Lee, Gyeong-Sik;

二和商事;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 43-46.

Abstract

Keywords

알기쉬운 電氣鍍金 理論

표면공학회편집부;

한국표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 47-55.

Abstract

講座 알기쉬운 電기化학 (本誌 10권 제1호 2호 3호)에 뒤이어 本 講座를 싣는다. 역시 실務表面技術法의 連載講座를 옮긴 것으로 다음 目次의 內容 3回로 나누어 考察될 것이다.

Keywords

Ferro-Nickel(NIRON)Plating Process의 作業考察

Hong, Yeong-Tak;

三立産業株式會社;

KISE Journal of Korean Institute of Surface Engineering, Vol. 11, No. , pp. 56-59.

Abstract

Keywords

  • Vol. 10 No.1
  • Vol. 10 No.2
  • Vol. 10 No.3

Vol. 10 No.1

Studies on Control of Gilding Liquid

Shin, Jong-Chul;Park, Kwang-Ja;Lee, Sung-Joo;Lee, Jong-Yong;

국립공업시험원;국립공업시험원;국립공업시험원;국립공업시험원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 1-18.

Abstract

To support the domestic plating industry concerning localized products, survey was conducted in with chemicals and properties of plating solution. Collected samples from 55 factories throughout the country were investigated by spectigated by spectrograph,

Keywords

Metal Cleaning

Yeo, Un-Mak;

홍익공업전문학교 금속과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 19-29.

Abstract

Keywords

鍍金液管理 -1. 크롬鍍金 (3)-

Ha, Lee-Yeong;

대원통상;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 34-36.

Abstract

Keywords

알기쉬운 電氣化學

표면공학회편집부;

한국표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 37-49.

Abstract

Keywords

Vol. 10 No.2

Astudy on the chromium plating from low concentrate bath

Lee, Kyung-Jin;Park, Kwang-Ja;Lee, Sung-Joo;Lee, Jong-Yong;

국립공업시험원;국립공업시험원;국립공업시험원;국립공업시험원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 1-18.

Abstract

In decorative chromium plating, highly concentrated conventionl baths ($CrO_3$ 150~400g/l) have been used. Because of the problems of heavy metal pollution and the saving of raw materials, chromium plating from dilute bath has been developed re

Keywords

鍍金技術의 內外動向

Gang, Hui-Taek;

한국금속표면처리 공업주식회사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 19-22.

Abstract

Keywords

亞鉛鍍金皮膜의 腐蝕

Lee, Jong-Nam;

한국금속표면공학회장 고대금속과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 23-33.

Abstract

Keywords

電氣鍍金에 있어서의 電壓管理

Lee, Bang-U;

대서산업주식회사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 34-35.

Abstract

Keywords

알미늄 表面處理工場에서의 成功事例

Park, Sang-Ho;

일진금속공업주식회사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 36-39.

Abstract

Keywords

鍍金液管理 -2. 니켈鍍金(I)-

Ha, Lee-Yeong;

대원통상;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 40-41.

Abstract

Keywords

알기쉬운 電氣化學

표면공학회편집부;

한국표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 42-50.

Abstract

Keywords

Vol. 10 No.3

3價크롬염에 의한 크롬鍍金

Go, Seok-Su;Park, Byeong-Ga;

金烏工業高等學校 金屬工學科;嶺南大學校文理科大學化學科;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 3-11.

Abstract

The trivalent choromium plating process have been studied by serveral group of orkers in the recent years. In the plating process, Alecra 3 process is the most familiar one. Potassium formate and potassium chloride of the bath compositions in the above pr

Keywords

鍍金液管理 2. 니켈鍍金(ii)

Ha, Lee-Yeong;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 17-20.

Abstract

Keywords

알기쉬운 電氣化學

표면공학회편집부;

한국표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 10, No. , pp. 21-29.

Abstract

Keywords

  • Vol. 9 No.1
  • Vol. 9 No.2
  • Vol. 9 No.3

Vol. 9 No.1

Removall of Heavy Metals and Toxic Elements from Wastewater

최의소;

고려대학교 이공대;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 1-7.

Abstract

Keywords

니켈도금의 제문제

여운관;

홍익공업전문대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 9-26.

Abstract

Keywords

Finishing Powder Metallurgy Products

Lenel, F.V.;

R.P.I. 공대명예;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 27-29.

Abstract

Keywords

Vol. 9 No.2

The Dissolving Reaction of Solid Iron with Molten Zinc

Yoon, Byung-Ha;Chung, In-Sang;Park, Kyung-Chae;

경북대학교 공과대학;경북대학교 공과대학;경북대학교 공과대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 1-7.

Abstract

The dissolving and growth kinetics of intermetallic compounds for the reaction between solid iron and molten zinc were studied under nitorgen atmosphere over the temperature range between470$^{circ}C$ and 680$^{circ}C$. The rates of

Keywords

일본에서의 도금기술의 동향

소모수부;강성군;

일본 임원 유리라이트주식회사 기술장;한양대학교 공과대학 재료공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 8-15.

Abstract

Keywords

Engineering Training in U.K. with special reference to Metal Finishing

Takats, T.J.;

UNESCO Training Adviser;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 16-24.

Abstract

Keywords

도금액관리 -1 크롬액(I)

하이영;

대원통사 대표이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 25-26.

Abstract

Keywords

Vol. 9 No.3

Gold Alloy Plating on Electronic Parts(II)

염희택;

한국금속표면처리연구소;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 1-4.

Abstract

In order to get high wear-resistant gold alloy plating on electronic parts, on attempt has been made, in which Cu, Ni, and Zn EDTA salts were added in gold palting solution. The results obtained on the wear resistance are as follows: 1. The addition of 0.

Keywords

A Study of Rupture Strength of Epoxy Resin Film by Water Pressure

백영남;

한양대학교 재료공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 5-8.

Abstract

In this study, a ruture strength of epoxy resin film coated on the leaking spot in waterpipe line was determined, using water pressure, without interrupting water supply. This results could be used for the sealing of water leakage in large size waterpipe

Keywords

도금액관리 1-크로액(2)

하이영;

대원통상대표이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 9-10.

Abstract

Keywords

국제분말치금학회참석기

문인병;

한양대학교 재료공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 9, No. , pp. 11-12.

Abstract

Keywords

  • Vol. 8 No.1
  • Vol. 8 No.2
  • Vol. 8 No.3

Vol. 8 No.1

A Study of Metal Technology in Ancient Silla Dynasity

강성군;조종수;

한양대학교 대학원생;한양대학교;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 1-9.

Abstract

The crorosion film of gilt bronz, silver and iron objects, which were excaved from Ancient Tomb of Silla Dynasty, was removed by the electrolytic reduction process. These metallic objects were mainly investigated for microstructure, designs and gilting fi

Keywords

Electroplating for the Electronics Industry

Ryder, Peter C.;

전 한국정밀기계센터 유네스코 기술전문가;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 11-14.

Abstract

Keywords

Hydrogen Embrittlement during Electrodeposition on Metals and Related Processes-A Review

Parthasaradhy, N.V.;

Central Electrochemical Research Institute-Madras Unit.;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 15-23.

Abstract

Electrodeposition of metals form aqueous solutions (eg, electroplating ) is frequently accompanied, by the discharge of hydrogen ions(in acidic solutions) or water molecules ( in alkaline electrolytes). The atomic hydrogen produced thus may partly diffuse

Keywords

대기농축을 광용한 도금용 크로오즈드시스템(상)-유해폐수와 스라지를 내지 않는 EVACONC

하이영;

대원통상대표이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 25-30.

Abstract

Keywords

Vol. 8 No.2

Rotary Cathode Tin Plating on Strip Type Semiconductors

이완구;

Fairchild Semiconductor (Korea) LTD.;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 1-6.

Abstract

A novel electroplating process is described and effects of anode lay-out thickness distribution and on platiting rate are discussed. Microphotograhic analysis indicates are compact and less "POROUS " than of barrel and rack. With this process production c

Keywords

New waste treatment technology in the metal finishing industry

김의동;

고려대학교 대학원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 7-13.

Abstract

Keywords

On water rinse and Water saving of Coating

김석준;

홍익대학교 대학원 금속공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 14-19.

Abstract

Keywords

The Effect of Surface Finish on Stick -slip with Cross-motion

Takats, T.J.;

UNESCO Training Adviser , F.I.C.;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 20-27.

Abstract

Keywords

대기농축을 응용한 도금용 크로오즈시스템(하)-유해까스와 스라지를 내지않는 EVACONC -

하이영;

대원통상대표이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 28-32.

Abstract

Keywords

Vol. 8 No.3

Optical Properties of Ag-Au Alloys

노평식;

아주공과대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 1-4.

Abstract

To study optical properties of Ag-Au alloys as the simplest homogeneous diordered alloys, the dependence of the reflectivity of Ag-Au alloys on their composition has been measured with the wave lengths ranging from 700m${mu}$ to 900m${mu}$

Keywords

Study on the Boriding of Steel in Ferroboron and NaBF4 Powder Mixture

김문일;여운관;

연새대학교;홍익공업전문학교;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 5-11.

Abstract

The boronizing method using ferroborn and NaBF4 powder mixture was studied for surface hardening of medium carbon steel. This boride layer was compared with a boride layer that was formed in ferroboron and KBF4 powder mixture. The frequency factor and ac

Keywords

Bend Cathod

하이영;

대원통상 대표이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 8, No. , pp. 13-14.

Abstract

Keywords

  • Vol. 7 No.1
  • Vol. 7 No.2

Vol. 7 No.1

한국도금업계의 문제점

여운관;

홍익전문학교;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 1-3.

Abstract

Keywords

Interaction of Water with Silver Iodide

백영현;

고려대학교 이공대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 5-12.

Abstract

The interaction energy of water molecule over the surfaces of basal planes of silver iodide has been calculated , assuming 1-4-6--12 type potentials between the gas molecule and lattice ions in the silver iodide lattice. The heat of adsorption ranges from

Keywords

진공증착법(제 3보)

박봉화;

봉화학공업사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 13-15.

Abstract

Keywords

Decorative Electrodeposited Metallic Coating

윤승렬;

한양대학교 재료공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 17-34.

Abstract

Keywords

Vol. 7 No.2

Decorative Electrodeposited Metalic Coating

이원해;

한양대학교 금속공학과교수;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 1-12.

Abstract

Keywords

자동차도장

전우상;

기아산업(주);

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 13-17.

Abstract

Keywords

도금유감

하이영;

서울사푸라이;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 18-22.

Abstract

Keywords

도금용정류기의 선택

김임수;

한국금속표면처리연구소;

KISE Journal of Korean Institute of Surface Engineering, Vol. 7, No. , pp. 23-24.

Abstract

Keywords

  • Vol. 6 No.1

Vol. 6 No.1

무전해 Ni 도금에 대해서

김종건;

한국금속표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 6, No. , pp. 1-6.

Abstract

Keywords

도금 업계의 공해 대책

이계열;

금속표면공학회 부회장;

KISE Journal of Korean Institute of Surface Engineering, Vol. 6, No. , pp. 7-10.

Abstract

Keywords

Al 상에 불투명 백색피막 형성법

좌등민언;생천목행자;전전공강;

지포공업대학 금속공학과;지포공업대학 금속공학과;지포공업대학 금속공학과;

KISE Journal of Korean Institute of Surface Engineering, Vol. 6, No. , pp. 11-14.

Abstract

Keywords

방식과 연, 아연

영실공이;

한국금속표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 6, No. , pp. 15-20.

Abstract

Keywords

일본금속표면기술계 방문기

김종건;

한국금속표면공학회;

KISE Journal of Korean Institute of Surface Engineering, Vol. 6, No. , pp. 21-23.

Abstract

Keywords

  • Vol. 5 No.1
  • Vol. 5 No.2
  • Vol. 5 No.3

Vol. 5 No.1

Fabrication & Evaluation of electroplated Copper Foils for Printed Circuit Board Applications

Yoon, Y. K.;Lee, J. H.;

원자력연구소;한국과학기술연구소 금속재료연구실;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 1-7.

Abstract

Copper -clad laminate(CCL) was fabricated and evaluated by bonding 35${pm}$5${mu}$ thick electroplated copper foils with a suitable adhesive to an insulating base such as phenolic resin laminate. In this study, electroplating methods

Keywords

인산염화성피막제가공법 -주로 스프라본데라이트 #100(SP#100)에 대하여-

김종건;

공영특수화학공업사 사장;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 8-10.

Abstract

Keywords

크롬도금의 피복력(Covering Power) 개량방법에 대하여

이진섭;

한국표면기술협회 이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 11-18.

Abstract

Keywords

The Electrodeposition of Rhodium

Ryder, Peter C.;

한국정밀기기센터 기술고문;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 19-26.

Abstract

Keywords

1.미세균열 크롬 도금

김회정;

한국금속표면기술협회이사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 27-27.

Abstract

Keywords

Vol. 5 No.2

ABS 수지상의 화학도금에서의 최적 Eteching 조건에 관한 연구

김원택;이인배;

한양대학교 공과대학;한양대학교 공과대학 조교;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 1-4.

Abstract

We have studied about the optimum chemical etching and sensitizing conditions of the plating on plastics. As specimen `Mitzubishi Nobren MM2A` was used. The results were as follow. 1) The optimum chemical etching conditions. Etched the specimens for

Keywords

경질크롬도금에서 경도와 내마모성과의 관계

오세진;

한국과하기술연구소;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 5-6.

Abstract

Keywords

주석도금 강판에 대하여

이석성;

동양석판공업주식회사 기술부장;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 7-15.

Abstract

Keywords

플라스틱 상의 무전해동도금

박용선;

동양정밀공업주식회사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 16-18.

Abstract

Keywords

방식과 연, 아연

영실공이;이종남;

삼금특수도료주식회사;고려대학교 이공대학교수;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 19-32.

Abstract

Keywords

2. 할셀 시험방법에 의한 전기도금 관리

김회정;

한국정밀기기센터;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 33-33.

Abstract

Keywords

Vol. 5 No.3

An Investigation on the Patination of Copper in Acidic Copper Sulfate Solution

윤승열;

한양대학교 공과대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 77-85.

Abstract

A method of preparation of synthetic ignorgaic coating on copper (patina) has been presented . An Eh--pH diagram was constructed for the present Cu-H2O-SO$_4$ system using the most recently available thermodynamic data. In the path of the patin

Keywords

인산염 피막제의 공정개념

김종건;

한국급속표면기술협회 부회장;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 86-88.

Abstract

Keywords

Tin Free Steel 에 관하여

제야달이;

일본 명길옥공업대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 89-94.

Abstract

Keywords

On Porous Chromium Plating

이진섭;

국일화학상사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 95-96.

Abstract

Keywords

방식과 연, 아연

영실공이;

삼금특수도료주식회사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 5, No. , pp. 97-102.

Abstract

Keywords

  • Vol. 4 No.1

Vol. 4 No.1

Theoretical Study of Boric Acid Determination In Nickel Plating Solution

염희택;

서울대학교 공과대학교수;

KISE Journal of Korean Institute of Surface Engineering, Vol. 4, No. , pp. 5-15.

Abstract

Rapid Determination of Boric Acid in Nickel Plating Solution by the addition of Na$_2$C$_2$O$_4$ and thus preventing the precipitation of i(OH)$_2$ during titiration , has previously been reported. In this paper

Keywords

A Study of Electro-Deposition for Pb-Sn-Cu Alloy System

Kang, T.;Cho, C. S.;Yum, H. T.;

서울대학교 공과대학;한양대학교 공과대학;서울대학교 공과대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 4, No. , pp. 16-23.

Abstract

In this study , fluoborte solution consisting of lead fluoborate, tin fluoborate and cupric acetate was used. By addition of small amount of Cu+= ion to the solution, the Cu content of deposition layer was almost controlled less than 5%. The amount of Cu

Keywords

전해연마에 영향을 주는 조건

조종수;

한양대학교;

KISE Journal of Korean Institute of Surface Engineering, Vol. 4, No. , pp. 24-25.

Abstract

Keywords

진공증착법( Vaccuum metallizing) 제 2보

박봉화;

서울대학교 공과대학 화공학과 대학원;

KISE Journal of Korean Institute of Surface Engineering, Vol. 4, No. , pp. 26-29.

Abstract

Keywords

철강의 이산염 화성피막처리법개요

김종건;

공영특수화학공업사;

KISE Journal of Korean Institute of Surface Engineering, Vol. 4, No. , pp. 30-35.

Abstract

Keywords

피로인산동 도금법

염희택;

서울대학교 공과대학;

KISE Journal of Korean Institute of Surface Engineering, Vol. 4, No. , pp. 36-37.

Abstract

Keywords

  • Vol. 3 No.1

Vol. 3 No.1

Rapid Analysis of Boric Acid in Nickel Plating Solutions

염희택;

서울대학교 공과대학교수;

KISE Journal of Korean Institute of Surface Engineering, Vol. 3, No. , pp. 7-12.

Abstract

Only mannitol or glycerine is generally used for the determination of boric acid in a nickel plating solution in order to make its acidic property so strong that it can be titrated with NaOH. However, these solutions give very amgiguous color change of in

Keywords

Vacuum metallizing

박봉화;

삼보공업사대표;

KISE Journal of Korean Institute of Surface Engineering, Vol. 3, No. , pp. 13-19.

Abstract

Keywords

Using Less nickel may increase your profit

Ha, J.S.st;

M&T Chemicals Inc. Market Manager;

KISE Journal of Korean Institute of Surface Engineering, Vol. 3, No. , pp. 20-21.

Abstract

Keywords

Principles of Phosphate Coatings

김종건;

공영특수화학공업사 대표;

KISE Journal of Korean Institute of Surface Engineering, Vol. 3, No. , pp. 22-23.

Abstract

Keywords

전기도금

Wernick, Dr.S.;

전 영국금속표면기술협회회장;

KISE Journal of Korean Institute of Surface Engineering, Vol. 3, No. , pp. 24-27.

Abstract

Keywords