- Past Issues
- e-Submission
-
2021 Impact Factor 1.766
5-Year Impact Factor 1.674
Editorial Office
- +82-2-563-0935
- +82-2-558-2230
- submission@kssse.or.kr
- https://www.kssse.or.kr/
2021 Impact Factor 1.766
5-Year Impact Factor 1.674
고려대학교 금속공학과;고려대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 3-9.
The intermetallic compount formation, growth rections, and growth kinetices as functions of the aging temperaturess, time, and the condition of substarte have invedtigted in the Sn/Cu and Sn/Ni bimetal couples. The η`-phase (Cu6Sn5) and
경북대학교 재료금속과;경북대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 10-16.
The properties of carburization on Fe-Cr alloys at 900-96
고려대학교 공과대학 금속공학과;고려대학교 공과대학 금속공학과;고려대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 17-25.
The structural Charactesties and adhesion of chemically vapor deposited TiN film on stain less steels have been investated as functions of deposition temperature, surface roughness of sub state, and types of substrates. The grain zine and the lattice para
경북대학교 공학대학 금속공학과;경북대학교 공학대학 금속공학과;경북대학교 공학대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 26-42.
It has between investigated that the optimum spaying conditions, such as, spraying distance, fusing temperature and fusing time, ect, in a Ni-cr base self fluxing alloy sprayed on the mild steel substrate by oxygen-acetylenc flame spraying. Sprayed specim
홍익공업전문대학 금속과;한국에너지연구소 부식공학연구실;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 43-51.
The characteristion of composite electroless Nikel palting on the condition of adding 3kinds ceramic dispersives, Al2O3, Si3O4 and artificial diamond powder were studied. Decreasing solution temperature for composite plating was required to depress the s
고려대학교 금속공학과;고려대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 47-54.
The effects of intermetallic compound growt on the sheet resistance and soldreability as functions of the aging time, the temperature, and the conditions of substrates have been investi-gated in the electroplallic compound (mainy Cu6Sn5and Ni3Sn4) and the
한양대학교 공과대학 공업화학과;한양대학교 공과대학 공업화학과;한양대학교 공과대학 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 55-61.
A fuel cell which causes electrochemical ratio of conventional with oxygen consists of mainly there parts, such as electrolyte, fuel and oxidant electrode. IN this paper, most efforts were delivered to manufacturing PETE-bonded gas-diffusion electrode,
충북대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 62-68.
Pb2+ ino, added in ctching sohing, is electrodeposited on a alumiunm foil for electrolycic condenser to promote its capacitance. In addition, several factoral factors in etching process are varied to examine how they change the capacitance of the condense
Dept. of Metallurgical Engineering, Hanyanng, University Seoul. 133-791;Dept. of Metallurgical Engineering, Hanyanng, University Seoul. 133-791;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 69-77.
Codeposion of inert particles particles in a metallic mateix by electroless plating process involves two phenomena. Firstly, the adsorption of inercles and secondly, the adsorption of inert particles on the cathode. In the present paper the first adsorpti
Dept. of Metallurgical Engineering, Hanyanng, University Seoul. 133-791;Dept. of Metallurgical Engineering, Hanyanng, University Seoul. 133-791;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 78-87.
Mechanism of formation of electroless composite coatings is similar to that of electrodeposited composite coating, but the amount of particles entraped in electroless coating is higher that the one of electrodeposited coatings. The methol of entrapment by
한국기계연구소 표면공학연구실;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 88-92.
양극산화 피막의 졀정구조에 관한 연구는 1960년대부터 반응 Mechanism의 연구와 병행하여 많은 논란이 되어왔다. 결정구조의 정확한 Model 이 아직까지 확립되어 있지 않은 상태에서, 여러 가지 접근방식으로 연구되고 있는 실정이다. 최근에는 HRTEM, NAS-NMR등의 고성밀 장비의 응용에 의한 결정구조의 분석에 활발히 진행이 되고 있으며, 이론 물리학의 응용 또한 이곳까지 확산되고 있는 상태이다. 본 고에서는 반응 Mechanism을 연구하는
Dept. of Metallurgical Engineering, Hanyang University seoul. 133-791;Dept. of Metallurgical Engineering, Hanyang University seoul. 133-791;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 101-108.
Effects of Na+ ion on zeta potential of SiC and Al2O3 particles suspended in nikel sufate and nickel chloride solutions were investigated. various complexing agents for Ni2+ ion were added to electroless Ni composite bath and the effects of the complexing
농업과학기술연구소;농업과학기술연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 109-117.
The effect of heft treatment on the characteristic properties of insulation layer is studied for two kinds of non-oriented silicon steels, which were insulation-coates with various kinds of inorganic and inorganic-organic complex coating solutions. In add
Insulation coating;Stress relief annealing, Inorganic coating;Inorganic-organic coating;
고려대학교 금속공학과;고려대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 118-127.
The rate of electrodeposition Zinc-nickel alloy on to electrolytic ione in sulface solution both under an inter and air atmospherss has studied by use of a rotating disc geometry. The kinetics shows 1st order reaction, and the rate constants are proportio
서울대학교 공과대학 금속공학과;서울대학교 공과대학 금속공학과;서울대학교 공과대학 금속공학과;서울대학교 공과대학 자원공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 128-134.
Mechanism of cobalt deposition was investigated using the potentiodynamic potentiostatic methods in solution of pH 4 and pH6.4 In all experimental conditions, polarization curves showed two regions with different Tafel slopes and the reaction order of cob
단국대학교 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 135-144.
Aluminium Oxide was deposited with a C.V.D.-technique on various substrates. The effects of various treating condition such as temperature, time, heat resistance and composition of substrates were investigated in order to understand the relationship of
한국기게연구소 표면공학연구실;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 145-153.
양극산화 피막의 형성 반응에 대한 연구는 1930년대부터 되어 왔으며, 특히 High Field Conduction에 대한 물리학자들의 관심도는 아주 높아었다. 1960년대 이르러 비정질 구조에 대한 심도 있는 연구가 진행되면서, 여러 가지 이론적으로 풀지 못하는 실험실적 결과들에 대한 제한들이 나오게 되었고, Ionic Migration Process에 대한 Kinetics는 많은 발전을 보게 되었다. 최근까지의 연구결과, Ioinc Conductio
한양대학교 공과대학 재료공학과;한양대학교 공과대학 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 161-167.
Effects of bath composition on electroless deposition of Ni-W-B from sulphate solution were invesrigated in terms of deposition kinetics, electro resistivity and composition of deposit film. The microstruigated and crystataine structure of the films were
영남대학교 금속과;영남대학교 금속과;영남대학교 금속과;영남전문대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 168-178.
The compositions and microstructures of Pb-Sn alloy electrodeposits were investigated in terms of the electrolysis conditions conditions by using fluoborate bath. The Pb content of alloy deposit decreased with increasing dreasing current density until the
경희대학교 기계공학과;경희대학교 화학과;경희대학교 기계공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 179-184.
This study seeks to the morphological changes in the oxide skin of the Al-10wt.%si alloy melts. These changes depend on the oxidation time and the temperature of the molten alloy, as well as the effects of adding Mg, Cu and Ni. Thess affects observed by X
대중금속공학고등학교;대중금속공학고등학교;경북대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 185-196.
The surface modification of a mild and stainless steel by alumina sprayed coating were studied. The effects of surface roughness and bond coating layer on the adhesive strengthy and durability of sprayed specimens were also investiated. The adhesive stren
영남대학교 금속공학과;영남대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 197-206.
The Composition and throwing power-of Pb-Sn alloy deposits are investigated in tems of the pulse parameters in pulse plating. Microhardness and intermal srress of alloy deposots are measured. The current efficiency of pulse plating is lower than that of D
영남대학교 금속공학과;영남대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 207-214.
The surface morphology and the proferred orientation of the Pb-Sn alloy electrodeposite were investated by the change of electrolysis conditions in pulse current electroplating. The preferred orientation of Pb-phase in alloy deposits was changed in the se
서울대학교 금속공학과;서울대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 22, No. , pp. 215-220.
Silicon Nitride whose thickness is about
한양대학교 공과대학 공업화학과;한양대학교 공과대학 공업화학과;한양대학교 공과대학 재료공학과;한양대학교 공과대학 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 3-9.
An electroless plating both for normal orientation of HCP-structure of Co-P to the film plane was developed. An ammonical succinate-citrate bath containg MnSo4, NiSO4 was studied Ni was codeposited into the films in order to decrease the saturation magent
영남대학교 공과대학;영남대학교 대학원;영남대학교 대학원;포항종합제철 산업기술연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 10-18.
The variation of Composition and the microstructure of Zn-Ni alloy electrodespposits were investigated to the electrolysis conditions chloride bath. The codeposition mechanism is of the equilibrium type in the electrolysis condition of the high temperatur
한국과학기술원 재료공학과;한국과학기술원 재료공학과;한국과학기술원 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 19-27.
The principe and practice of pulse plating, and prospect in the future on pulse plating are reviewed. Some of the advantages of pulse pulse plating are detailed as compared with DC plating. The advantages of pulse plating are summarized as follows: 1)smoo
Surface Engineering Labratory, Korea Institute of Machinery and Metals;Surface Engineering Labratory, Korea Institute of Machinery and Metals;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 28-33.
경희대학교 공과대학 원자력공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 47-52.
The purpose of th this study was to determine an adsorption capaty of cesium by domestic zeolite, clinoptilolite, which has adsorption selectivity and resistence to radiolytic degradation, and to find the operation of column packed natural or Na cinopt
영남대학교 공과대학 금속공학과;영남대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 39-46.
Corrosion behavior of 5-26wt% Ni-Zn electrodeposited alloys was investigated by means of dipping electrochmical polarization measurement and galvanic coupling test. The weight loss and anodic polarization curve of coatings were measured by means of dippin
한양대학교 재료공학과;한양대학교 재료공학과;경희대학교 기계공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 53-67.
The high temperature corrosion of Fe-C alloys were studied at I atm SO gas in the temperature range 500~80
한양대학교 공업화학과;한양대학교 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 68-75.
To know the growth behavior of Conductive polyaniline file, the anodic oxidation of anilien on a platiunm in aqueous sulfuric acid solution has been studied. Cyclic votammetry and currenttime transisents method used to investigate the anodic oxidation of
영남대학교 이과대학;영남대학교 이과대학;대구대학교 이공대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 76-82.
The bright nickel electroplatings were carried out the Watt bath containg a solobel saccharin as class I brightner and para substituted benzaldehydes as class II one. Extended Huckel MO calculation was done and polarization was measured to examine between
한양대학교 공업화학과;한양대학교 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 95-102.
The anodic oxidation of aniline in aqueous sulfuric acid solution on a platinum was studied. To examine of mechanism of this reaction, the date were obtained during controlled potential electrolysis, aided by computer system. The reaction mechanism was
한국기계연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 103-113.
Forschungsinstitut fur Edelmetalle und Metallchmi;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 114-129.
The principles of the physical vapour deposition processes(PVC); evaporation, sputting, and ion plating are presented and compared with each other with respect to coating properties, deposition rate and process control. The significance of coating sources
한국기계연구소 표면 공학 연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 130-141.
최근에 와서 알루미늄소재의 양극산화피막 형성Mechanism에 관한 연구는 응용분야의 폭넓어지면서 많은 연구가 진행되고 있다. 최신분석 장비의 응용의 폭이 넓어짐으로 해서 연구의 깊이도 점차 증가되고 있는 실정이다. 따라서, 선진국 양극산화피막에 관한 연구는 어디까지 왔는가를 조명하므로 해서 그 응용의 기반을 확고히 하기 위해 본 Review를 연재하고자 한다. 본고에서는 가장 기본적인 연구과제와 양극화산화피막의 Morphology에 관한 내용이다.
한양대학교 공과대학 재료공학과;한양대학교 공과대학 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 149-159.
Electrodeposition of chromium from low concentration chromjum (III) sulfate complexess in aqueous using sodium formate-glycine mixtures as a complexing agent was studied. In the bath formation, it is found that the optimum again temperature and time for e
한양대학교 공과대학 재료공학과;한양대학교 공과대학 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 160-167.
Electrochemical behaviors od chromium electrodeposition from 0.05M chromium (III) sulface complexes in aqueous solutions using sodium formate-glycine mixtures as a complexing agent were studied. In the cathodic current-potential cures, it is found that th
인하전문대학;인하대학교 공과대학 금속공학과;인하대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 168-175.
The nickel0zinc allot depositions have been studjen in ammonium chloridw added chloride baths to fine out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies, corrosion
한양대학교 재료공학과;한양대학교 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 176-182.
Effects of Cr, Ni and W on the anodic polarization behavior were investigated for Fe-Cr-Ni-W alloys in deaerated 1N HCI solution. Surface films formed on the polarization were analysed using AES, SEM and EDAX. A higerconcentration of tungten was found in
한국기계연구소 표면공학연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 21, No. , pp. 183-192.
양극산화피막의 조성은 현대 장비의 정밀도가 nano 영역까지의 성분 분석이 이루어 짐의로서, 최근에 와서 금속한 진전을 나타내고 있다. 특히 TEM. EDC System을 이용한 Ultramicrotomed 시편의 정밀분석 기술은 이제 한계를 나타내고 있는 것 같다. 본고에서는 반응 Mechanism을 연구하는데 가장 필수적인 분야인 양극산화피막의 조성에 관해 1950 연대 이후 어떻게 연구되고 설명되었는가를 조명하므로 해서, 그 응용의 기반을 확고히
Dept. of Metallurgical Engineering in Ha Technical Junior College;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 4-14.
The nickel-zinc alloy depositions have been studied in nickel chloride added chloride baths, to find out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies and the meta
한양대학교 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 15-24.
超硬合金과 高速度鋼에 TiC, TiN 그리고
금속표면처리 기술사;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 25-30.
미국의 정부규격은 국방규격(Military Specification and Standard) 연방규격(Federal Specification Standard)이 있으며 금속표면처리에 관련된 규격인 전기도금규격, 아노다이징, 화성피막처리, 기타 코팅 규격은 40여종으로 되어있다. 이들 규격서와 표준서는 미국내 정부베이소 구매시의 금속표면처리 제품과 때로는 장비의 구입 계약시에 지침이 되고 있다. 전민간의 산업체와 일반 상품의 가공에 생산과 품질관리에 두루
Dep`t of Materials Eng. HanYang Univ.;Dep`t of Materials Eng. HanYang Univ.;Dep`t of Materials Eng. HanYang Univ.;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 43-48.
Chromium and Aluminum films were deposited by evaporation technique in
Department of Metallurgical Engineering, KyungPook National University;Department of Metallurgical Engineering, KyungPook National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 49-59.
The properties of
Dept. of Metall. Engng., Kyungpook National University;Korea Tungsten Co., Ltd.;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 60-73.
For the purpose of improving the cyclic oxidation resistance of Ni-base superalloy, Inconel 600, aluminide coating methods are studied. The formation rate of aluminide coating layers is measured as a function of time and pack composition to find out the o
금속표면처리 기술사;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 74-76.
지난 3월초 1회용 주사기 메이커인 H사에 기술지도시 정밀한 공차로 제조된 주사기가 그 많은 병원에서 단지 1회 사용후 버리는 것이 무척이나 아까와서 이의 재활용, 도금액 관리에 적용코자 고안하여 특허(?)로 등록하려다가... 여러 회원(Plater)에게 널리 알려 품질 향상과 제조원가 절감의 도금액 관리에 쉽고 간단히 활용하도록 우선 1차로 각종 도금의 전 공정중 산처리액과 수세수 관리에 대하여 기술코져 한다.
한양대학교 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 77-85.
최근 10년간 공구의 耐마모 코우팅 분야는 급속한 발전을 하여 왔다. 처음에는 초경 합금 인서트를 TiC로 단층 코우팅하였다. 코우팅 효과를 고려함에 따라 TiC, Ti(C,N), TiN으로 코우팅하게 되었고 또한
Dept. of Metall. Engng., Kyungpook National University;Dept. of Metall. Engng., Kyungpook National University;Dept. of Metall. Engng., Kyungpook National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 95-105.
For the purpose of improving the hot corrosion resistance of Ni-base superalloy, Inconel 600, aluminide and chromium-aluminide coatings by pack cementation process were studied. The morphology of these coatings is dependent on the type of process employed
Dept. of Metall. Eng. KOREA University;Dept. of Metall. Eng. KOREA University;Dept. of Metall. Eng. KOREA University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 106-117.
The microhardness and the structural characteristics of the chemically vapor deposited TiN film on the 430 stainless steel substrate have been investigated with various deposition parameters such as the deposition time, the total flow rate, the flow rate
Dept. of Metall. Eng. Young Nam University;Dept. of Metall. Eng. Young Nam University;Pohang Steel works Researcher Laboratories;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 118-126.
The Zn-Al composite electroplating was studied by using chloride zinc bath containing metal hydroxides
금속표면처리 기술사;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 127-130.
버리는 일회용 주사기와 안약병, 샴프나 음료수병을 함께 사용하여 도금액 공정관리에 활용코자 전호에 이은 기술해설이다. 도금 뿐만아니라 전, 후처리의 모든 공정은 화학과 물리적인 반응이 계속하여 이루어지고 각 공정사이의 수세 공정 또한 액관리가 되어야 할진대, 도금액 관리만이 중요한 액관리인양 도금 공정 이외의 다른 공정은 도외시 하고 있는것이 현실이다. 이에 전공정중 산세, 수세공정 관리법에 이어 탈지공정과 아연도금의 후처리인 크로메이트 처리공정의 액
Dept. of Industrial Chemistry, Hanyng University;Inorganic Chemistry Division, National Industrial Research Institute;Inorganic Chemistry Division, National Industrial Research Institute;Inorganic Chemistry Division, National Industrial Research Institute
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 135-143.
Various complexing agents were investigated to see the effects on the normal orientation of HCP structure of Co-alloy to the film plane in ammoniacal electroless plating bath. To obtain the optimum condition, several complexing agents were investigated to
Department of Metallurgical Engineering, Yonsei University;Department of Metallurgical Engineering, Yonsei University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 144-153.
In the case of dipping the Ni-Resist cast iron into molten aluminum with iron content, the thickness of intermetallic compound was remarkably increased with increasing iron content. The thickness was shown by following equation in the range of 1-3% iron
Korea Advanced Institute of Science and Technology;Korea Advanced Institute of Science and Technology;Korea Advanced Institute of Science and Technology;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 154-162.
The recent literatures on the amorphous plating are reviewed. The methods of the amorphous plating are classified into the electrodeposition and electroless deposition. The structure and properties of the amorphous deposits, and the prospect in the future
기술사;
KISE Journal of Korean Institute of Surface Engineering, Vol. 20, No. , pp. 163-168.
급변하는 국내외 환경속에서 국가의 과학기술 발전은 기술정보가 판가름한다고 할 수 있다. 그 기술정보중에서 금속표면처리의 분야는 해외 정보 입수의 어려움, 국내의 번역 및 소개책자의 전무로 정보와 자료를 얻기가 힘들어 선진기술 정보를 알 길이 막혀있다. 관련 기술 정보를 확산, 대중화하는 출판물 등을 통해서 기술 인력의 저변확대와 신기술의 개발에 기대가 클 것은 말할 나위 조차 없다. 다른 산업에 비하여 특히 금속표면처리 관련의 기술 정보 분야는 뒤떨어져
Dept. of Industrial Chemistry, College of Engineering, Hanyang University;Dept. of Metallurgical Engineering, Hongik Technical College;Dept. of Industrial Chemistry, College of Engineering, Hanyang University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 3-12.
Influences of pH, temperature, and composition of bath on the deposition rate and the magnetic properties were studied for two kinds of electroless Co-P plating bath. The results obtained are as follows. Ammonia alkaline citrate bath was more stable than
Department of Metallurgical Engineering, College of Engineering, Kyung-Pook National University;Department of Metallurgical Engineering, College of Engineering, Kyung-Pook National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 13-19.
Manganese in the Anode slime and the paste-positive material of waste-dry cell was recovered by leaching with the hydrochloric acid solution. The impurities (Zn, Fe, Pb), co-leached with manganese were removed from the leached solution prior to electrolys
Dept. of Metallurgy Hong-Ik Technical College;Dept. of Material Engineering College of Engineering, Hanyang University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 31-43.
The properties of the electroless nickel deposit mainly depends on the pH of the bath, the plating temperature, and the molar ratio of nickel to hypophosphite but they are also affected by its formulation and concentration of complexing and buffering agen
Dept. of Metallurgical Eng. College of Engineering Seoul National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 44-50.
Effects of cathodic overvoltages on the electrodeposition of lead from electrolyte containing lead chloride, ammonium acetate and sodium succinate was investigated at 20
Korea Institute of Energy and Resources;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 51-58.
A theoretical model was proposed to predict the rate of particles impinging on the negatively biased substrate and the total kinetic energy per unit time. The model takes into an account of kinetic theory based on Maxwell statistics and elementary plasma
Korea Institute of Machinery and Metals;Korea Institute of Machinery and Metals;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 59-64.
Pulse current was empolyed to the chromium electroplating bath of self-regulating high speed in the following range of conditions; 10-80
Department of Metallurigical Engineering Kyung Pook National University;Department of Metallurigical Engineering Kyung Pook National University;Department of Metallurigical Engineering Kyung Pook National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 83-91.
Codeposited of boron nitride(BN) particle dispersed into electroless nickel-phosphours (Ni-P) and nickel-boron(Ni-B) platings were studied for the purpose of developing the wear resistance and lubricity. BN can be codeposited from electroless nickel plati
Dept. of Metallurgical Engineering College of Engineering Sung Kyun Kwan University;Dept. of Metallurgical Engineering College of Engineering Sung Kyun Kwan University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 92-108.
An electroplating on the lead frame fabricated from domestic copper plate was studied experimentally. In this study, nickel was plated on the thin copper lead frame and silver layer was coated on the nickel film in the cyanide electrolyte. The effect of p
Dept. of Industrial Chemistry Kon Kuk University;Dept. of Industrial Chemistry Kon Kuk University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 109-120.
The electroless nickel plating on high alumina ceramics was performed in the bath containing nickel chloride, sodium hypophosphite and mono- or bi-carboxylic acid as a complexing agent in order to examine the empirical rate law as well as the effects of t
Korea Institute of Machinery and Metals;Korea Institute of Machinery and Metals;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 121-127.
There are many plating methods already commercially employed in te surface technology. One of the plating methods is electroless (chemical) plating, which is deposited by auto-catalytic reduction of metallic ion with the reducing agent in the plating bath
Department of Materials Engineering, College of Engineering, Hanyang University;Department of Materials Engineering, College of Engineering, Hanyang University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 133-139.
The effects of alternating voltage,
Department of Industrial Chemistry, College of Engineering, Hanyang University;Department of Materials Engineering, College of Engineering, Hanyang University;Department of Industrial Chemistry, College of Engineering, Hanyang University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 140-148.
Using sodium pyrophoshate as complexing agent, the characteristics and the magnetic properties of the films deposited from electroless cobalt plating bath have been studied. The result obtained are as following; 1. It was found that the optimum bath compo
국립공업시험원 무기화학과;국립공업시험원 무기화학과;국립공업시험원 무기화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 19, No. , pp. 149-154.
Dept. of Metallurgical Engineering, Korea Univ.;Dept. of Metallurgical Engineering, Korea Univ.;Dept. of Metallurgical Engineering, Korea Univ.;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 5-11.
Titanium was deposited onto AISI-430 stainless steel by chemical vapor deposition from
한국기계연구소 표면처리실;한국기계연구소 표면처리실;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 12-19.
한양대학교 공과대학 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 20-38.
아무리 제품을 잘 만들어도 최종적인 표면처리가 불량하면 그 제품은 전혀 가치가 없어지는 것은 주지의 사실이다. 현재 우리나라 제품도 무척 좋아져서 선진 제국가의 제품과 어깨를 나란히 할 수 있게 되었다. 86아시안 게임 및 88올림픽등에 우리의 상품을 세계에 떳떳하게 내 놓으려면 이 물건들을 만드는 제조자의 조그만 정성이 필요함은 물론이다. 이런점을 감안하여 여기서는 금속표면을 미려하게하는 도금기술에 대해, 특히 금 도금의 기술문제와 최근 세계의 금 도
Dept. of Metallurgical Engineering Yeungnam University;Pohang Iron & Steel Co., Ltd.;Dept. of Metallurgical Engineering Yeungnam University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 53-60.
The microstructure of zine electrodeposits was investigated by using zinc sulfate solution in still bath. The cathode current efficiency decreased with increasing current density, and decreasing temperature. The preferred orientation of the zinc electrode
국립공업시험원 무기화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 61-66.
국립공업시험원 공해시험과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 67-71.
국립공업시험원 신뢰성시험과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 72-75.
태양금속주식회사;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 76-77.
한양대 공대 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 78-82.
Department of Metallurgical Engineering Seoul National University;Department of Metallurgical Engineering Seoul National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 95-104.
A study has been made of preferred orientation, crose sectional microstructure, surface morphology and mechanical properties of copper foils fabricated by electrodeposition on 304 stainless steel plate from copper sulfate baths for high speed plating. The
Korea Institute of Machinery & Metals;Korea Institute of Machinery & Metals;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 105-115.
Lead-tin-copper ternary alloy electrodeposition is conducted onto the inner bore surface of plain bearings as an overlay in order to investigate the effect of slot width, current density and fluoboric acid concentration on the uniformity of overlay. The t
Department of Metallugical Engineering Pusan National University;Department of Metallugical Engineering Pusan National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 116-124.
Chemical vapor deposition of
Dept. of Metallurgical Engineering, Chung Nam National Unvirsity;Dept. of Metallurgical Engineering, Seoul National Unvirsity;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 125-133.
About 1 mm thick nickel electrodeposits were obtained from nickel sulphamate baths at 40 to 60
한양대 공과대학 재료공학과;한양대 공과대학 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 134-137.
Dept. of Metallurgical Engineering Hong Ik Technical College;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 153-163.
In the electroless nickel plating bath which contained nickel sulfate, sodium hypophosphite, boric acid and triethanolamine, effect of their concentration on the rate of deposition was tested by gravimetric method and polarization method. The polarization
Dept. of Metallurgical Engineering Young Nam University;Dept. of Metallurgical Engineering Young Nam University;Pohang Steelworks Researcher Laboratories;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 164-183.
The microstructure of the zinc electrodeposits was investigated by changing the flow rate of electrolyte in zinc sulfate Bath. The cathode current efficiency increased with increasing flow rate of electrolyte. The preferred orientation of zinc electrodepo
中小企業振興公團;
KISE Journal of Korean Institute of Surface Engineering, Vol. 18, No. , pp. 184-198.
고려대학교 공과대학 화학공학과;고려대학교 공과대학 화학공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 1-6.
The fluidized bed electrode reactor(FBER) with conducting particles has been made use of the removal of metals from dilute electroplating rinse water. The electrolysis was carried out under the conditions of diaphragm current density with 2~28A/
釜山大學校 金屬工學科;釜山大學校 金屬工學科;釜山大學校 金屬工學科 大學院;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 7-13.
Carburizing of a 12%Cr steel containing 0.6%Si was performed at 950
弘益工大 金屬科;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 14-19.
University of Ulsan;Corrosion and Protection Centre, UMIST;Corrosion and Protection Centre, UMIST;Battelle Laboratories, Columbus;Battelle Laboratories, Columbus;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 29-40.
The structure of rapidly solidified Al-Si-based alloys and its relationship to subsequent anodic film growth in near neutral and acid solutions have been investigated. Solidification of the alloys proceeds via pre-dendritic nuclei, associated with rugosit
영남대학교 금속과;포항종합제철;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 41-58.
Zinc was electrodeposited from cyanide solutions at temperature from 20
한양대학교 공과대학 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 59-63.
하루가 다르게 발전하고 있는 최첨단기술인 電子材料의 膜 형성기술중 amorphous silicon(a-Si) 을 電氣鍍金으로 얻는 방법을 소개하였다. 1975년 a-Si이 p-n制御가 가능한 半導體임이 확인된 이후, 큰 면적의 太陽電池, 複寫機用 感光體薄膜, transistor array 등의 응용이 착착 진행되고 있다. 종래의 單結晶실리콘 半導體를 이용한 太陽電池는 가격면에서 비싸 경제성이 적었던 것이 a-Si의 등장으로 小型 計算機등에 까지 a-Si
충남대학교 공과대학;충남대학교 공과대학;서울대학교 공과대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 73-77.
The surface residual stresses in 1mm thick nickel electrodeposits obtained from four types of nickel sulphamate baths at 40 to 60
한국기계연구소;한국기계연구소;한국기계연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 78-86.
Hard anodic oxide film was investigated formed on pure aluminium with various temperature (30
공업진흥청 국립공원시험원;공업진흥청 국립공원시험원;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 99-105.
Integral coloring of aluminum and its alloy with the elecrolytic solution of sulfosallicylic acid and sodium hydroxide was investigated in this study. Addition of hydrogen peroxide and potassium permanganate accelerated the anodizing speed and deepened th
영남대학교 금속과;영남대학교 금속과 대학원;
KISE Journal of Korean Institute of Surface Engineering, Vol. 17, No. , pp. 106-119.
Brass was electrodeposited over the range of the current densities from 2 to 8 A/
영남대학교 금속공학과;영남전문대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 3-9.
The change of the hardness and yield strength depending upon the electrolysis conditions was investigated for Watts and bright nickel electrodeposits. The hardness of Watts nickel electrodeposits decreased with increasing current density in the range of 1
Berlin 공대, 금속공학과 비철야금 및 전기야금 전공;Berlin 공업전문대학 금속과;한국과학기술원 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 10-27.
한양대학교 반월대학 금속재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 41-47.
An investigation has been performed on the effects of temperature and Ni addition on the wetting behaviour of Cu on W substrate in hydrogen atmosphere. An sessile drop method was used to measure a wetting angle. The concentration profiles of W, Cu and Ni
Berlin 공대, 금속공학과 비철야금 및 전기야금 전공;Berlin 공업전문대학 금속과;한국과학기술원 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 48-66.
기아산업(주) 조립부;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 67-76.
Technische Universitat Berlin;Technische Universitat Berlin;Technische Fachhochschule Berlin;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 87-97.
석출전위가 낮은 금속들을 저농도용액에서 전기분해하여 회수하는 방법에 대해 아연과 카드뮴을 모델로 삼아 채취방법을 연구하였다. Hull cell과 hyperbolic twin cell에서 시험해서 전류밀도와 효율이 낮기 때문에 기존방법으로는 회수속도가 매우 느린 것을 알 수 있었다. 전해 채취조건을 좋게 하기 위해서는 음극의 표면적을 크게 하고 흔들어 주며, 또 전해액을 강제 순환시켜 물질이동이 잘 되도록 해야만 한다. Rotating tubular be
경북대 공대 금속공학과;경북대 공대 금속공학과;경북대 공대 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 98-107.
A study on the improvement of wear resistance of brasses by electroplating and diffusion treatment of tin was carried out. The optimum condition of the treatment obtained was as follows. Plating thickness of tin : 5 - 9
Max-Planck-Institut fur Metallforschung Institut fur Werkstoffwissenschaften Heisenbergstr;Max-Planck-Institut fur Metallforschung Institut fur Werkstoffwissenschaften Heisenbergstr;Max-Planck-Institut fur Metallforschung Institut fur Werkstoffwissenschaf
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 108-123.
순수 Mo와 Mo-Nb, Mo-Ta(
동양공업고등학교 교사;인천대학;연세대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 153-159.
The growth rate equation of Fe-Zn alloy layer was represented by x = Kt, and hence the growth of alloy layer was considered to be controlled by diffusion process. The constituent of alloy layer formed on the steel surface was identified to be intermetalli
한양대학교 공업화학과 대학원생;한양대학교 공대 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 160-172.
티오요소류, 폴리에테르류, 염료와 같은 유기화합물이 첨가된 황산동 전기도금욕에서 석출된 구리의 광택, 평활력효과를 무첨가욕과 기존 광택제가 첨가된 도금욕에서와 각각 비교하여 이들 유기첨가제가 구리의 석출상태와 음극분극에 미치는 영향을 Hull cell 실험과 현미경관찰, 전기화학적 측정방법에 의해 고찰하였다. 황산동 전기도금욕에서 thiourea, 2-mercapto-2-imidazoline, 1-acetyl-2-thiourea와 같은 유기 황화합물은
영남대학교 산업대학원 공업경영 전임;포항종합제철 품질관리소;영남대학교 대학원;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 173-187.
Zinc was electrodeposited at temperature from 20
인하공업전문대학 조교수(금속공학과);인하대학교 공과대학 교수(금속공학과);
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 188-194.
The method of trivalent chromium plating has been studied. The relations between the mixing ratio of chromic chloride and DMF, and the corrosion resistance and throwing power of plated chromium have been investigated. As a result, the best result has been
중소기업 진흥공단 지도단;
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 195-198.
KISE Journal of Korean Institute of Surface Engineering, Vol. 16, No. , pp. 199-214.
Up to this date, numerous methods of analysis of electroplating solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearne
홍익공학전문대학 금속과;홍익공학전문대학 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 1-10.
Electroless plating is the continious formation of metallic coatings from metal ions by che-mical reduction without the use of electrical current. This is, however, more expansive than the conventional electroplating but is often used because of certain a
Graduate School S.N.U.;Graduate School S.N.U.;Faculty, College of Eng. S.N.U.;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 11-18.
80% Ni-Permalloy is soft magnetic material with high initial permeability and low magnetic coercive force Hc, and is used to computer memory cores and minirelays of communication e-ngineering. In this paper 80 Permalloy thin film on copper cathode was all
서울대학교 공과대학 금속공학과;영남대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 18-23.
The microstructure of Watts and bright ni-ckel electrodepositss is correlated with pref-erred orientation. The characteristics lamellar structure of bright nickel was atributed to the periodic adsorption of organic additives and related to cyclic fluctuat
연세대학교 산업대학원 공업경영 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 24-38.
The Objective of this study is to analyze structural and operational aspects of the govern-ment, its associations, industries and academic associations related to metal-plating industry, and thereby recommend ways of promotion of subsector, which is yet t
홍익공학전문대학 금속과;홍익공학전문대학 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 57-67.
Electroless Ni-plating is often utilized in industries due to its physical and mechanical characteristics in contrast to conventional electroplatings. Thus, electroless Ni-plating will be broadly applicated in many fields. However, The physial and mecha
서울대학교 대학원 금속과 대학원생;서울대학교 공과대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 69-76.
With a view to manufacturing membranes for separation of gas mixtures, Al foils were anodized in a 2% oxalic-acid electrolyte at 40V and 80V. When anodizing was completed and Barrier layer existed at the extreme back site of the foil, the anodized foil wa
홍익공업전문대학 금속과;홍익공업전문대학 금속과;홍익공업전문대학 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 77-81.
The conditions for the formation of low temperature sulfurized layer and wear characteristics are as follows ; 1. Salt bath KSCN 98%∼K2S 2% showed porous sulfurized layer. 2. Sulfurized layer thickness at 200
연세대학교 산업대학원 공업경영 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 82-97.
한양대학교 공과대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 98-108.
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 109-112.
홍익공업전문대학 금속과 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 113-115.
경북대학교 금속공학과 대학원;경북대학교 공대 금속과;경북대학교 공대 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 127-137.
In chemical plating of nickel and chromium on steel, studies on various factors affect-ing the plating operations were carried out. The optimum bath compositions and operat-ing conditions were obtained. The structure and properties of the as deposits or d
부산대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 138-145.
The effects of the simultaneous variations of the ratio of feed gases(H2/N2 Flow ratio), feed gas flow rate (H2/N2, total-flow rate) and partial pressures of TiCl4 (PTiCl41) as well as deposition time and cobalt content of the substrate on the deposition
한양대학교 이과대학 화학과;한양대학교 공과대학 공업화학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 146-151.
The electrochemical reaction behavior of nickel electrode of the nickel-cadium battery system in potassium hydroxide solution has been studied by cyclic voltammetry, controlled potential electrolysis and X-ray diffraction method. It has been found that t
태양금속공업주식회사 고문;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 152-163.
경희대학교 기계공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 164-171.
홍익공대 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 172-178.
경북대학교 공대 금속공학과;경북대학교 공대 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 192-207.
A study has been made of the interaction parameters of Zn other elements in dilute solutesd solution of molten cadmium alloys over the temperature range of 450 to 570
연세대학교 공대 금속공학과 대학원생;연세대학교 공대 금속공학과 대학원생;연세대학교 공대 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 208-217.
To study the effect of TiC coating on weight change, microhardness, wear and heat - resistance of TiC layer, chemical vapour deposition on the various substrates has been carried out with the gaseous mixture of TiCl4, toluene, and H2 in the temperature ra
홍익대학교 공과대학 대학원생;홍익공업전문대학 금속과;홍익대학교 공과대학 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 218-225.
The effects of ferrous ion on the properties of bright nickel electrodeposit were exa-mined. Iron exists as ferrous ion (Fe+2) and ferric ion (Fe+3) in the bath, a portion of the former tend to be oxidized to the somewhat harmful ferric ion. Iron was adde
College of Engineering, Korea University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 226-235.
한양대학교 재료공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 15, No. , pp. 236-240.
College of Engineering, Seoul National University;College of Engineering, Seoul National University;College of Engineering, Seoul National University;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 5-9.
The effects of silicon content on the corrosion rates of Cu-7wt% Al alloys have been investigated by the use of electrochemical methods. The corrosion current densities of the alloys are decreased with the addition of Si up to 2wt%, and the slightly incre
한국기계연구소 표면처리 연구실장;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 10-18.
일본 대성공업 (주) 전무;국립공시험원 표면처리과장;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 19-23.
홍익공업전문대학 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 24-35.
이 작업 표준은 전기도금을 시행하기에 앞서 행하는 탈지작업의 일반적인 기본원칙을 규정한다. 특별한 경우에는 여기서 기술하는 일반적인 기본원칙과 다른 방법으로 탈지작업을 시행해도 무방하다.
(주)경관정보 서비스대표;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 74-82.
일본 동해대학교수;홍익공대 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 83-96.
홍익공대 금속과 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 97-102.
;Dept. of materials and metalmrgical eng., Stevens Institute of Technology.;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 137-141.
니켈 도금의 표면 조직과 두께에 따른 조직의 변화를 투과 전자 현미경을 사용하여 관찰하였다. epitaxial deposit층의 두께는 도금 용액 속에 들어있는 외부 물질에 따라 변화하게 되며, substrate의 결정 방향에 따라 또한 변화한다. (110)면 보다는 (100)면에 도금했을 때 epitaxial deposit 층의 두께가 더 큰 것을 알 수 있었다. non-epitaxial 층으로 변화되는 과정은 hillock의 생성과 계속되는 Twin
연세대학교 대학원;두산조직주식회사;연세대학교 공과대학;연세대학교 공과대학;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 142-150.
The present paper clarified mechanism of quench crack formation in high carbon steel dur-ing quenching, and, in order to prevent the quench crack, proposed two basic guides in alloy design of high carbon tool steel. They are to raise Ms temperature of hig
일본 동해대학;홍익공대 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 151-160.
진풍상사 대표;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 161-168.
금속기술상담소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 169-173.
공익공대 금속과 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 174-176.
Universitate Berlin;Universitate Berlin;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 209-214.
Electrolytic recovery of gold and silver from diluted solutions has at first been applied nearly 100 years ago. Compared with other recovery techniques electrolytic treatment offers several advantages. But to achieve high space-time yields special constru
한국기계연구소 표면처리연구실 연구원;한국기계연구소 표면처리연구실 실장;홍익 공업 전문대학 금속과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 215-220.
The surface appearance of chromium electrodeposit was studied by employing a pulse curr-ent plating in self-regulating high speed (SRHS) bath containing 20 g/
경희대학교 부설 산업현장연구소장;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 221-233.
Section 102(2) (c) of the National Environmental Policy Act of 1969 of the United States requires an environmental assessment of the major federal actions that could significantly a-ffect environmental quality. The review is known as the NEPA assessment p
한국도금재과 공업주식회사 이사 공장장;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 234-244.
한국표면공학회;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 245-254.
홍익공대 금속과 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 255-263.
공익공대 금속과 전임;
KISE Journal of Korean Institute of Surface Engineering, Vol. 14, No. , pp. 256-259.
한양대 공대 공업화학과;한양대 공대 공업화학과 대학원;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 3-7.
The crystalline structure and leveling action on the deposit of zinc from the cyanide zinc electroplating bath containing organic additives, such as aldehydes, polymers, amines and condensed product, have been studied by microscope and X-ray diffraction m
大洋實業 (株) 大表理事;弘益大學校 金屬工學科 敎授;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 8-15.
The critical voltage of hard coat range of Al alloys (K 186, 43S) at various electrolytes and the effects of voltage, temperature of electrolytes and concentration of sulfric acid were investigated, m the hope that to find the adequate voltage. Two kind o
日本 輕金屬工業 (株) 取締役 開發本部長;弘益工業專門大學 敎授;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 16-29.
工業詩驗院 表面處理課長;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 30-37.
高麗大學校 工科大學 敎授;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 38-44.
本 工學會 副會長 大原通商 (株) 代表理事;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 45-48.
弘益工大 金屬科 助敎授;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 49-51.
弘益大學校 工科大學 副敎授;延世大學敎 工科大學 敎授;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 81-86.
The mechanical properties of aluminized steel were investigated after the JIS SB 41 plates were dipped in molten aluminum bath. (1) The growth rate of iron-aluminum alloy layer was fast in early stage of alumizing, and then gradually decreased with increa
日本輕金屬工業 (株) 取締役 開發本部長;弘益工大 金屬科 敎授;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 87-100.
日本上材工業 (株) 中央硏究所長;韓國度金材料工學 (株) 工場長;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 101-104.
韓國鍍金材料工學株式會社 工場長 理事;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 105-118.
大原通商株式會社 代表理事;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 119-121.
弘益工業專門大學 金屬科 專任;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 122-127.
Department of Materials Science, Korea Advanced Institute of Science;Department of Materials Science, Korea Advanced Institute of Science;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 146-154.
The effects of various electrodeposition conditions (deposition temperature and cathode current density) on preferred orientation and microhardness of electrodeposited Ni-Sn and Sn-Zn alloys were studied. At deposition temperatures from 25
日本 堅金屬工業(株) 取締役 開發本部;弘益工業專門大學;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 155-166.
東海大學;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 167-180.
한국기계금속시험연구소;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 181-188.
경북대학교 금속공학과;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 189-198.
金烏工科大學 技械工學部;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 211-220.
Internal stress of electrodeposited metals affect physical and mechanical characteristics of deposits. Internal stress of nickel deposits was reviewed intensively. Important outcomes are as follows. Substrate have an important effect on internal stress of
College of Engineering, Seoul National Unioersity;;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 221-227.
When anodizing the Al in the acid electrolyte, it is well known that the parallel pores grow continuously perpendicular to the surface. This fact can be used for the manufacturing of the porous membrane, if thc pores pass through the anodized foil. Anodiz
弘益工大 金屬科;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 228-243.
弘益工大 金屬科;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 244-251.
한국표면공학회;
KISE Journal of Korean Institute of Surface Engineering, Vol. 13, No. , pp. 252-260.